Product name: Hybrid powder coating
General introduction:
The use of epoxy resin and polyester resin as the main raw material prepared by the two at the same time have their own unique performance, making the production of the coating has excellent decorative, mechanical properties and strong corrosion resistance, widely used in All kinds of indoor metal products coating.
Product Series:
Can provide standard and low temperature curing powder coating products.
Can be made of gloss (more than 80%), half-gloss(50-80%), semi-gloss (20-50%) and matt (20%) products. (According to the needs of users control gloss)
Powder physical properties:
proportion(g/cm3, 25℃):1.4-1.7
Distribution of particle size: 100% less than 60um (can be adjusted according to special requirements of coating)
Curing conditions:
Standard type 180℃ (workpiece temperature), 15 minutes
Low temperature curing type 160℃ (workpiece temperature), 15 minutes
Coating performance:
Test items | Test the standard or method | Test indicators |
---|---|---|
Impact strength | GB/T 1732-1993 | 50kg.cm |
Cupping test | GB 9753-1988 | 8mm |
Adhesion | GB/T 9286-1998 | 0 level |
bending | GB 6742-1986 | 2mm |
Pencil hardness | GB/T 6739-1996 | 1H-2H |
Salt spray test | GB 1771-1991 | >500 hours |
Hot and humid test | GB 1740-1989 | >1000 hours |
Heat resistance | 100℃×24h(white) | Excellent light retention, color difference ≤0.3-0.4 |
Note | 1. The above test uses 0.8 mm thick cold-rolled steel sheet with standard treatment, and the coating thickness is 60-80 um. | |
2.The performance of the above coating may vary with color and gloss. |
Average coverage:
9-12m2/kg, The film thickness is about 60um (calculated with 100% powder coating usage)