Product name: Art powder coating
General introduction:
Can provide a hybrid, pure polyester powder coating art patterns of various kinds of resin type, which are suitable for indoor or outdoor use. This product has the unique appearance of the luxury decoration effect, can help cover the defect itself. The substrate coating is widely used in all kinds of high-grade metal products.
Product Series:
Can provide sand lines, hammer lines, silk patterns, marble lines, metal appearance and other effects of products.
A variety of gloss products can be supplied according to user's requirements.
Powder physical properties:
proportion(g/cm3, 25β): 1.2-1.8
Distribution of particle size: 100% less than 100 microns(Specific indicators depending on the effect of art, according to the special requirements of painting to adjust)
Curing conditions: Depending on the resin type of the product, please refer to the product's accompanying instructions.
Coating performance:
Test items | Test the standard or method | Test indicators |
---|---|---|
Impact resistance | GB/T 1732-1993 | 30-50kg.cm |
Cupping test | GB 9753-1988 | 6mm |
Adhesion(Grid method) | GB/T 9286-1998 | 0 level |
winding | GB 6742-1986 | 3mm |
Pencil hardness | GB/T 6739-1996 | 1H-2H |
Salt spray test | GB 1771-1991 | >500 hours |
Hot and humid test | GB 1740-1989 | >1000 hours |
Note | 1. The above test uses 0.8 mm thick cold-rolled steel sheet with standard treatment, and the coating thickness is 60-80 um. | |
2. The performance of the above coating may vary depending on the artistic effect and the type of resin. |
Average coverage:
7-10 m2/kg, The film thickness is about 80 um (calculated with 100% powder coating usage)